NIMBioS Help

User Tools

Site Tools

Trace: • printer_setup_claxton
printer_setup_claxton

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
printer_setup_claxton [2014/05/27 15:56]
peek created 		printer_setup_claxton [2021/11/16 18:35] (current)
jondale [Printer Setup]
Line 1: Line 1:
 ====== Printer Setup ====== ====== Printer Setup ======
  
-A common question for the IT staff is how to gain access to the NIMBioS printers.  This question is presented to us most often by short-term visitors and workgroup/workshop guests.  Because this is such a frequent question, this page has been dedicated to answering it.+Below is a table containing the information that you will need to access NIMBioS printers.
  
-====== Required Information ======+^ Printer Location ^ Printer Make/Model ^ Type ^ IP Address ^ Manufacturer's Product Support Page ^ 
 +| C-124 | HP Color LaserJet M452dn | Color | 160.36.130.151 | [[https://support.hp.com/us-en/product/hp-color-laserjet-pro-m452-series/7326532|Manuals & Drivers]] | 
 +| C-130 | HP LaserJet P2055dn | B+W | 160.36.130.149 | [[https://support.hp.com/us-en/product/HP-LaserJet-P2055-Printer-series/3662052/model/3662058?jumpid=reg_r1002_usen_s-001_title_r0002|Manuals & Drivers]] |
  
-Below is a table with all the important information that you will need to know to install these printers on your personal machine. +  * [[https://support.microsoft.com/en-us/help/17420/windows-printer-problems|How To Install A Printer Under Windows 7 and 8]] 
- +  * [[https://support.microsoft.com/en-us/help/4015386/windows-10-install-printer|How To Install A Printer Under Windows 10]] 
-^ Printer Location ^ Printer Make/Model ^ IP Address ^ +  * [[https://support.apple.com/kb/ph25081?locale=en_US|How To Install A Printer Under Apple OSX]] 
-| C-124 | TOSHIBA eSTUDIO-456 | 160.36.130.162 | +
-| C-124 | HP LaserJet M2727nf MFP | 160.36.130.152 | +
-| C-124 | Xerox Phaser 8560DN | 160.36.130.164 | +
- +
-The following printers are available in near postdoc suites: +
- +
-^ Printer Location ^ Printer Make/Model ^ IP Address ^ +
-| C-130 | HP LaserJet P2055dn | 160.36.130.4140 | +
- +
- +
-**NOTE:** The printer location includes a 3-character building designation as specified by the university.  You can see all the building designations on UT's map page [[http://www.utk.edu/maps/|here]].  This building designation is used by the NIMBioS IT staff when naming printers, so that users can find a printer near them quickly and easily. C stands for Claxton and the number is a close room number. +
- +
-====== C-124 TOSHIBA eSTUDIO 456 ====== +
- +
-{{:printer_-_toshiba_e-studio_453.jpg?nolink&300|}} +
- +
-Printer Location: C-124\\  +
-Printer Make/Model: TOSHIBA eSTUDIO 456\\  +
-Printer IP Address: 160.36.130.162\\ +
-http://business.toshiba.com/product/index.jsp?ID=e-STUDIO456&site=usa&color=Blue +
-===== Installation Instructions ===== +
- +
-==== Windows XP ==== +
- +
-  * Click: ''Start'' > ''Printers and faxes'' +
-  * Click: ''Add a printer'' +
-  * Click: ''Next'' +
-  * Click: ''Local printer attached to this computer'' +
-  * Click: ''Next'' +
-  * Select: ''Create a new port'' +
-  * Type of port: ''Standard TCP/IP Port'' +
-  * Click: ''Next'' +
-  * Click: ''Next'' +
-  * Printer Name or IP Address: ''160.36.130.162'' +
-  * Click: ''Next'' +
-  * Click: ''Finish'' +
-  * Manufacturer: ''TOSHIBA'' +
-  * Printers: ''TOSHIBA s-STUDIO Universal PCL6''\\ (**NOTE**: If your Windows XP operating system does not have this printer, then click on ''Windows Update'' to update your printer drivers.) +
-  * Click: ''Next'' +
-  * Printer name: ''C-124 TOSHIBA e-STUDIO 456'' +
-  * Click: ''Next'' +
-  * Do you want to print a test page: Yes +
-  * Click: ''Next'' +
-  * Click: ''Finish'' +
- +
-==== Windows 7 ==== +
- +
-  * **NOTE**: If you are replacing/repairing a faulty previous installation of this printer, be sure to remove the old printer first +
-    * Click: ''Start'' > ''Devices and Printers'' +
-    * Right-click on the previous TOSHIBA printer device +
-    * Select: ''Remove Device'' +
-    * **NOTE**: If the device does not disappear from the list of printers and faxes, do not continue, but call on NIMBioS IT for assistance. +
-  * Obtain the appropriate driver for your machine +
-    * First, check to see if your system is 32-bit or 64-bit: +
-      * Click: ''Start'' > ''Computer'' +
-      * Click on ''System properties'' +
-      * Look for ''System type'' in the properties list +
-    * Download the driver:\\ [[http://copiers.toshiba.com/downloads/KB/file_uploads/10915/eBX_D1733_PD_UNI.zip]] +
-    * Extract the ZIP file that you just downloaded: +
-      * Right-click on the ZIP file +
-      * Select ''Extract All...'' from the pop-up menu +
-      * Click ''Extract'' +
-      * **Important**: Remember this directory location on your system. +
-  * Click: ''Start'' > ''Devices and Printers'' +
-  * Click: ''Add a printer'' +
-  * Click: ''Add a network, wireless or Bluetooth printer'' +
-  * Click: ''The printer that I want isn't listed'' +
-  * Select: ''Add a printer using a TCP/IP address or hostname'' +
-  * Click: ''Next'' +
-  * Device type: ''Autodetect'' +
-  * Hostname or IP address: ''160.36.130.162'' +
-  * Make sure that ''Query the printer and automatically select the driver to use'' is **unchecked** +
-  * Click: ''Next'' +
-  * Click: ''Have Disk...'' +
-  * In the "Install From Disk" pop-up window, click: ''Browse...'' +
-  * In the "Locate File" window that appears, navigate to the directory where you extracted the driver ZIP file\\ (You can probably find it under the "Recent Places" location just to the left in the same window.) +
-  * Select: ''eS4ex2''\\ (There should only be one file listed.) +
-  * Click: ''Open'' +
-  * Click: ''OK'' +
-  * In the "Add Printer" window, you should see "TOSHIBA e-STUDIO4520CSeriesPCL6" listed under "Printers"\\ Click: ''Next'' +
-  * Printer name: ''C-124 - TOSHIBA e-STUDIO 456'' +
-  * Click: ''Next'' +
-  * Click: ''Print a test page'', check that a test page really did print on the printer +
-  * Click: ''Finish'' +
- +
-==== OSX 10.x.x ==== +
- +
-  * Click: The Apple icon (top-left corner) +
-  * Click: ''System Preferences...'' +
-  * Click: ''Print & Fax'' +
-  * If necessary, click the lock to make changes, and enter your password +
-  * Click: ''+'' +
-  * Click: ''IP'' +
-  * Protocol: ''Line Printer Daemon - LPD'' +
-  * Address: ''160.36.130.162'' +
-  * Name: ''C-124 TOSHIBA e-STUDIO-456'' +
-  * Print Using: ''TOSHIBA e-ST456 Series'' +
-  * Click: ''Add'' +
-  * Finisher: ''Multi-Position Stapler'' +
-  * Drawers: ''Not Installed'' +
-  * Click: ''Continue'' +
- +
- +
-====== C-124 Xerox Phaser 8560DN ====== +
- +
-{{:printer_-_xerox_phaser_8560dn.jpg?nolink&300|}} +
- +
-Printer Location: C-124\\  +
-Printer Make/Model: Xerox Phaser 8560DN\\  +
-Printer IP Address: 160.36.130.164\\ +
-http://www.support.xerox.com/support/phaser-8560/downloads/enus.html?operatingSystem=win7x64 +
-===== Installation Instructions ===== +
- +
-==== Windows XP ==== +
- +
-**NOTE**: Windows XP does not contain the proper print drivers for this printer by default.  Since it is the goal of most visitors to simply get "up and printing", the instructions below only cover how to set up a generic PCL printer driver for this printer. +
- +
-  * Click: ''Start'' > ''Printers and faxes'' +
-  * Click: ''Add a printer'' +
-  * Click: ''Next'' +
-  * Click: ''Local printer attached to this computer'' +
-  * Click: ''Next'' +
-  * Select: ''Create a new port'' +
-  * Type of port: ''Standard TCP/IP Port'' +
-  * Click: ''Next'' +
-  * Click: ''Next'' +
-  * Printer Name or IP Address: ''160.36.132.50'' +
-  * Click: ''Next'' +
-  * Click: ''Finish'' +
-  * Manufacturer: ''Generic'' +
-  * Printers: ''MS Publisher Color Printer''\\ (**NOTE**: If your Windows XP operating system does not have this printer, then click on ''Windows Update'' to update your printer drivers.) +
-  * Click: ''Next'' +
-  * Printer name: ''C-124 Xerox Phaser 8560DN'' +
-  * Click: ''Next'' +
-  * Do you want to print a test page: Yes +
-  * Click: ''Next'' +
-  * Click: ''Finish'' +
- +
-By using a generic printer driver, users can begin using the printer in minutes.  However, by not using the official Xerox driver some functionality will be missed when using this printer.  If you would like to use the official Xerox driver, you can find download and installation instructions [[http://www.support.xerox.com/go/results.asp?Xtype=download&prodID=8560&Xlang=en_US&Xcntry=USA|here]]. +
- +
-==== Windows 7 ==== +
- +
-  * Click: ''Start'' > ''Devices and Printers'' +
-  * Click: ''Add a printer'' +
-  * Click: ''Add a network, wireless or Bluetooth printer'' +
-  * Click: ''The printer that I want isn't listed'' +
-  * Select: ''Add a printer using a TCP/IP address or hostname'' +
-  * Click: ''Next'' +
-  * Device type: ''Autodetect'' +
-  * Hostname or IP address: ''160.36.130.164'' +
-  * Make sure that ''Query the printer and automatically select the driver to use'' is checked +
-  * Click: ''Next'' +
-  * Manufacturer: ''Xerox'' +
-  * Printers: ''Xerox Phaser 8560DN''\\ (**NOTE**: If your Windows 7 operating system does not have this printer, then click on ''Windows Update'' to update your printer drivers.) +
-  * Printer name: ''C-124 Xerox Phaser 8560DN'' +
-  * Click: ''Next'' +
-  * Click: ''Print a test page'', check that a test page really did print on the printer +
-  * Click: ''Finish'' +
- +
-==== OSX 10.x.x ==== +
- +
-  * Click: The Apple icon (top-left corner) +
-  * Click: ''System Preferences...'' +
-  * Click: ''Print & Fax'' +
-  * If necessary, click the lock to make changes, and enter your password +
-  * Click: ''+'' +
-  * Click: ''IP'' +
-  * Protocol: ''Line Printer Daemon - LPD'' +
-  * Address: ''160.36.130.164'' +
-  * Name: ''C-124 Xerox Phaser 8560DN'' +
-  * Print Using: ''Generic PostScript Printer'' +
-  * Click: ''Add''+
  
 +**NOTE:** The printer location includes a 1-to-3-character building designation as specified by the university.  You can see all the building designations on UT's map page [[http://www.utk.edu/maps/|here]].  This building designation is used by the NIMBioS IT staff when naming printers, so that users can find a printer near them quickly and easily. C stands for Claxton and the number is a nearby room number.
  
 ====== Disclaimer ====== ====== Disclaimer ======
Line 187: Line 18:
   * The documentation above is merely for guidance.  Menus, options, and commands presented may not match the reader's particular operating system, software, or versions.   * The documentation above is merely for guidance.  Menus, options, and commands presented may not match the reader's particular operating system, software, or versions.
   * None of these documents have a brain.  Readers are expected to provide their own.   * None of these documents have a brain.  Readers are expected to provide their own.
 +
printer_setup_claxton.1401206176.txt.gz · Last modified: 2014/05/27 15:56 by peek

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki